Density at 15 °C = kg/m3 (table 54B). Refer to bulletin V for more . Values calculated as per API Standard () Chapter To obtain the net. found in the second column of Table 1. standard density value stated in Table 1, in conjunction with the API table 54 B, at the . API Chapter ,. Gasoline: Alcohol Blends. (15% alcohol max). Table 54B. The volume correction tables to be used are those known to be . API chapter Table 54B (mean density), API chapter M.
|Published (Last):||19 October 2004|
|PDF File Size:||18.51 Mb|
|ePub File Size:||2.61 Mb|
|Price:||Free* [*Free Regsitration Required]|
API M Stream Density
P E is “0” for liquids which have an equilibrium vapour pressure less than The purpose of revision 2 was to set a date after which the practise of manual temperature compensation will not be allowed.
For these reasons, the practice of manual temperature compensation, at all levels of trade, will not be permitted after January 1, Please refer to the applicable bulletin for tables approved for specific non petroleum-based products.
Read the VCF corresponding to the mean liquid temperature.
V—Manual correction of measured liquid volumes to equivalent volumes at reference conditions Category: However, such corrections or conversions must be performed using proper and prescribed methods in order to ensure an accurate statement of the net quantity.
If needed, interpolate the VCF value to the nearest 0. Correction factors for the effect of pressure C pl on propane liquid volume Source: The purpose of revision 3 was to update the format of the bulletin to meet web accessibility requirements. Monitoring of the marketplace has shown that the procedures set out in this bulletin have not been universally applied, thereby resulting in inaccurate trade measurement and potential fraud.
These tables are summarized in Table 1. This bulletin communicates the policy and outlines the procedures for the manual correction of measured liquid volumes to equivalent volumes at reference conditions.
API 11.2.1M Stream Density
If the temperature is to be manually determined, the contents of section 3 of this bulletin apply. Since that time, the demand on manufacturers for this equipment has subsided and prices are more competitive.
It shall also state the reference density used, the mean temperature, the gross meter registration and the calculated net quantity. For additional information regarding this bulletin, please contact the Senior Program Officer responsible for volume. It shall also state the reference pressure used, the reference density used, the mean temperature, mean pressure as well as the net and gross meter registrations. In situations where pressure compensation is desirable, additional dynamic pressure sensing elements must tahle provided in the metering installation.
This table is either as prescribed in section of the Weights and Measures Regulations or in the appropriate bulletin.